DOC Public Conservation Areas

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

160431
10002
Updated
03 Jan 2017

This dataset was last updated on Koordinates on 03 Jan 2017.

Spatial representation of DOC's management units defined by various acts of parliament and legislation. The attributes in this dataset are derived from the (NaPALIS) National Property and Land Information System, which is a centralised database for all Land Information New Zealand (LINZ) and Department of Conservation (DOC) administered land.

Layer ID 754
Data type Vector multipolygon
Feature count 10168
Primary key NaPALIS_ID
Services Vector Query API

NZ Elevation Survey Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

45386
1541
Updated
05 Dec 2022

This dataset was last updated on Koordinates on 05 Dec 2022.

The NZ Elevation Survey Index dataset provides an index to all LiDAR derived elevation datasets found on the LINZ Data Service. Each record in the dataset provides both a geometry of the extent of the elevation survey, as well as useful metadata attributes. The extents are derived from the maximum extent of DEM and DSM coverage and consist of full NZTopo50 1k tiles, even where a tile is only partially covered with data. These extents only provide a rough indication of corresponding point cloud coverage which can be quite different for some elevation surveys.

Please refer to the NZ Aerial Surveys Data Dictionary for detailed metadata and information about this dataset.

The elevation data referenced by this dataset is available on the LINZ Data Service.

Layer ID 104252
Data type Vector multipolygon
Feature count 59
Primary key elevation_survey_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Imagery Survey Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

36695
858
Updated
01 Dec 2022

This dataset was last updated on Koordinates on 01 Dec 2022.

The NZ Imagery Survey Index dataset provides an index to all orthophoto index tiles found on the LINZ Data Service. Each record in the dataset provides both a geometry of the maximum extent of the orthophoto index, as well as all attributes found in each index tile. This dataset therefore provides information to assess orthophoto coverage and metadata across the entire country.

Please refer to the NZ Aerial Surveys Data Dictionary for detailed metadata and information about this dataset.

The imagery data referenced by this dataset is available on the LINZ Data Service.

Layer ID 95677
Data type Vector multipolygon
Feature count 183
Primary key imagery_survey_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ 1:10k Tile Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

21383
107
Updated
27 May 2020

This dataset was last updated on Koordinates on 27 May 2020.

The NZ 1:10k Tile Index dataset provides a 1:10,000 scale index for aerial imagery and LiDAR datasets.

This tile index is part of a collection of indexes which are referenced to the NZ 1:50k Tile Index dataset.

Like the NZ 1:50k Tile Index, these larger scale indexes support mapping of NZ mainland and coastal areas up to 50m in depth.

The dataset includes the following attributes:

index_tile_id: Unique identifier for the NZ 1:10k Tile Index table.
sheet_code_id: The corresponding sheet code of the NZ 1:50k Tile Index.
scale: The map scale of the index tiles.
tile: The combination of the row and column numbers of the index tiles.

Related tile indexes:
- NZ 1:50k Tile Index
- NZ 1:5k Tile Index
- NZ 1:2k Tile Index
- NZ 1:1k Tile Index
- NZ 1:500 Tile Index

Layer ID 104690
Data type Vector polygon
Feature count 12725
Primary key index_tile_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ 1:5k Tile Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

20139
131
Updated
27 May 2020

This dataset was last updated on Koordinates on 27 May 2020.

The NZ 1:5k Tile Index dataset provides a 1:5,000 scale index for aerial imagery and LiDAR datasets.

This 1:5k tile index is part of a collection of indexes which are referenced to the NZ 1:50k Tile Index dataset.

Like the NZ 1:50k Tile Index, these larger scale indexes support mapping of NZ mainland and coastal areas up to 50m in depth.

The dataset includes the following attributes:

index_tile_id: Unique identifier for the NZ 1:5k Tile Index table.
sheet_code_id: The corresponding sheet code of the NZ 1:50k Tile Index.
scale: The map scale of the index tiles.
tile: The combination of the row and column numbers of the index tiles.

Related tile indexes:
- NZ 1:50k Tile Index
- NZ 1:10k Tile Index
- NZ 1:2k Tile Index
- NZ 1:1k Tile Index
- NZ 1:500 Tile Index

Layer ID 104691
Data type Vector polygon
Feature count 50900
Primary key index_tile_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ 1:50k Tile Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

19680
249
Updated
27 May 2020

This dataset was last updated on Koordinates on 27 May 2020.

The NZ 50k Tile Index dataset provides a 1:50,000 scale base index for larger scale indexes used for aerial imagery and LiDAR datasets.

This index is different from Topo50 Map Sheets in that there are no overlapping index polygons in this dataset.

This index also expands further into the sea to support future mapping in coastal areas and encompasses all offshore locations up to 50m in depth.

The dataset includes a map sheet code consistent with those from Topo50 Map Sheets, and an attribute for each tile to show whether there is a corresponding Topo50 map sheet with matching location coverage.

Related tile indexes:
- NZ 1:10k Tile Index
- NZ 1:5k Tile Index
- NZ 1:2k Tile Index
- NZ 1:1k Tile Index
- NZ 1:500 Tile Index

Layer ID 104687
Data type Vector polygon
Feature count 509
Primary key sheet_code_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Statistical Area 2 2021 Clipped (generalised)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14905
461
Updated
13 Jan 2021

This dataset was last updated on Koordinates on 13 Jan 2021.

This dataset contains the annually released statistical area 2 (SA2) boundaries for 2021 as defined by Stats NZ, clipped to the coastline. This clipped version has been created for map creation/cartographic purposes and so does not fully represent the official full extent boundaries. This version contains 2,176 SA2 categories.

SA2s were introduced as part of the Statistical Standard for Geographic Areas 2018 (SSGA2018) which replaced he New Zealand Standard Areas Classification (NZSAC1992). The SA2 geography replaces the (NZSAC1992) area unit geography.

SA2 is an output geography that provides higher aggregations of population data than can be provided at the statistical area 1 (SA1) level. The SA2 geography aims to reflect communities that interact together socially and economically. In populated areas, SA2s generally contain similar sized populations.

SA2s are built from SA1s and either define or aggregate to define urban rural areas, territorial authorities, and regional councils. SA2s in city council areas generally have a population of 2,000–4,000 residents while SA2s in district council areas generally have a population of 1,000–3,000 residents. In rural areas, many SA2s have fewer than 1,000 residents because they are in conservation areas or contain sparse populations that cover a large area.

Names are provided with and without tohutō/macrons. The name field without macrons is suffixed ‘ascii’.

This generalised version has been simplified for rapid drawing and is designed for thematic or web mapping purposes.

Digital boundary data became freely available on 1 July 2007.

Layer ID 105161
Data type Vector multipolygon
Feature count 2176
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ 1:1k Tile Index

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14799
281
Updated
27 May 2020

This dataset was last updated on Koordinates on 27 May 2020.

The NZ 1:1k Tile Index dataset provides a 1:1,000 scale index for aerial imagery and LiDAR datasets.

This 1:1k tile index is part of a collection of indexes which are referenced to the NZ 1:50k Tile Index dataset.

Like the NZ 1:50k Tile Index, these larger scale indexes support mapping of NZ mainland and coastal areas up to 50m in depth.

The dataset includes the following attributes:

index_tile_id: Unique identifier for the NZ 1:1k Tile Index table.
sheet_code_id: The corresponding sheet code of the NZ 1:50k Tile Index.
scale: The map scale of the index tiles.
tile: The combination of the row and column numbers of the index tiles.

Related tile indexes:
- NZ 1:50k Tile Index
- NZ 1:10k Tile Index
- NZ 1:5k Tile Index
- NZ 1:2k Tile Index
- NZ 1:500 Tile Index

Layer ID 104692
Data type Vector polygon
Feature count 1272500
Primary key index_tile_id
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Benthic protection areas (2016 report)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

14780
94
Added
19 Oct 2016

This dataset was first added to Koordinates on 19 Oct 2016.

New Zealand’s four million km2 marine environment is diverse, with a range of coastal habitats and offshore seabed environments. There are also many marine species unique to New Zealand. Marine protected areas conserve or manage some of these unique habitats and species, while a range of other tools also provide marine protection. We report on the area covered by these tools as an indirect measure to understand the state of the marine environment.
Benthic protection areas (protected seabed areas) are one of the marine protection tools used. They are designated areas in the exclusive economic zone, which extends from the 12 nautical mile seaward limit of the territorial sea to the 200 nautical mile limit. Bethnic protection areas protect seabed habitats through the prohibition of bottom trawling and dredging. There are some areas where seamount closures overlap with benthic protection areas. In these cases the seamount closure restrictions apply.
Note that the thumbnail preview of this spatial data does not reflect the data underlying it. Please see the methodology for a more reflective preview.

Layer ID 53494
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine Reserves

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12899
270
Added
11 Jan 2016

This dataset was first added to Koordinates on 11 Jan 2016.

The location and extent of Marine reserves (type 1 marine protected areas) in the territorial sea.

Layer ID 52760
Data type Vector multipolygon
Feature count 44
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 303