Tagged: New Zealand

10cm colour orthophotography of the area affected by the 22 February 2011 Christchurch earthquake.

Flown on 24 February 2011 by NZ Aerial Mapping for the Christchurch Response Centre (CRC).

LINZ Data Service
Up to date data from Land Information New Zealand is available for free from the LINZ Data Service. Visit the LINZ Data Service for the latest version of this layer: data.linz.govt.nz/layer/284

Height points layer from the LINZ 1:50,000 NZTopo database, also known as spot heights.

Definition: A height above a vertical datum, represented on a map by a dot locator with the elevation printed beside the dot. Unlike trigonometrical stations, spot heights are not identifiable on the ground.

Related:

• New Zealand 20m Contours
  

IMPORTANT NOTE: Contains data sourced from Land Information New Zealand. Crown Copyright reserved. Land Information New Zealand gives no warranty in relation to the data, including its accuracy, reliability and suitability and accepts no liability whatsoever in relation to any loss, damage or other costs relating to the use of any data, any compilations, derivative works or modifications of the data.

The Postcode Network File (PNF) is supplied on the following terms:

• The PNF is only to be used in the development of an entry into the 2011 Mix and Mash competition;
  
• For the avoidance of doubt the PNF supplied is not to be used to develop or deliver commercial products, services of solutions, i.e. those supplied to an end-user for a fee or commercial consideration;
  
• New Zealand Post does not warrant or guarantee that the PNF is complete, current, accurate or free from viruses or other 'malware';
  
• The PNF is supplied as a one-off, "as-is" file, and there is no maintenance, updates or user support supplied other than the data and documentation delivered as part of the PNF.
  

The data is also available to you on a commercial basis, please visit the website to learn more.

NZDEM_SoS_v1.0 is a Digital Elevation Model (DEM) covering the whole of New Zealand at a spatial resolution of 15m, created by the School of Surveying by interpolating LINZ topographic vector data.

The DEM was created as a series of 30 maps which extent correspond exactly with the LINZ Topo250 topographic map series. Smaller regions can thus be obtained individually but also fit together seamlessly to create a full countrywide DEM.

The accuracy of this product was comprehensively assessed using a statistically sound selection of 3791 check points throughout the country. The comparison of results with other available country-wide DEM demonstrate an improvement of NZDEM_SoS_v1.0 in terms of quality that comes in addition with a finer spatial resolution.

A full description of the interpolation/assessment process can be found in the attached documentation: Columbus, J.; Sirguey, P. & Tenzer, R. (2011), 'A free, fully assessed 15-m DEM for New Zealand', Survey Quarterly 66, 16-19.

NZSoSDEM v1.0 is a Digital Elevation Model (DEM) covering the whole of New Zealand at a spatial resolution of 15m, created by the School of Surveying by interpolating LINZ topographic vector data.

The DEM was created as a series of 30 maps which extent correspond exactly with the LINZ Topo250 topographic map series. Smaller regions can thus be obtained individually but also fit together seamlessly to create a full countrywide DEM.

The accuracy of this product was comprehensively assessed using a statistically sound selection of 3791 check points throughout the country. The comparison of results with other available country-wide DEM demonstrate an improvement of NZDEM_SoS_v1.0 in terms of quality that comes in addition with a finer spatial resolution.

A full description of the interpolation/assessment process can be found in the attached documentation: Columbus, J.; Sirguey, P. & Tenzer, R. (2011), 'A free, fully assessed 15-m DEM for New Zealand', Survey Quarterly 66, 16-19.

NZDEM_SoS_v1.0 is a Digital Elevation Model (DEM) covering the whole of New Zealand at a spatial resolution of 15m, created by the School of Surveying by interpolating LINZ topographic vector data.

The DEM was created as a series of 30 maps which extent correspond exactly with the LINZ Topo250 topographic map series. Smaller regions can thus be obtained individually but also fit together seamlessly to create a full countrywide DEM.

The accuracy of this product was comprehensively assessed using a statistically sound selection of 3791 check points throughout the country. The comparison of results with other available country-wide DEM demonstrate an improvement of NZDEM_SoS_v1.0 in terms of quality that comes in addition with a finer spatial resolution.

A full description of the interpolation/assessment process can be found in the attached documentation: Columbus, J.; Sirguey, P. & Tenzer, R. (2011), 'A free, fully assessed 15-m DEM for New Zealand', Survey Quarterly 66, 16-19.

New Zealand Police administrative boundaries go out to the 12NM limit and are made up of 12 Police Districts which are divided into Areas. Each Police Area is divided into several Stations. Police Station boundaries are used to record events, and against which statistics are gathered.
NOTE: Chatham Islands Station is not included in this dataset, but is part of Wellington District and Wellington Area.

NZSoSDEM v1.0 is a Digital Elevation Model (DEM) covering the whole of New Zealand at a spatial resolution of 15m, created by the School of Surveying by interpolating LINZ topographic vector data.

The DEM was created as a series of 30 maps which extent correspond exactly with the LINZ Topo250 topographic map series. Smaller regions can thus be obtained individually but also fit together seamlessly to create a full countrywide DEM.

The accuracy of this product was comprehensively assessed using a statistically sound selection of 3791 check points throughout the country. The comparison of results with other available country-wide DEM demonstrate an improvement of NZDEM_SoS_v1.0 in terms of quality that comes in addition with a finer spatial resolution.

A full description of the interpolation/assessment process can be found in the attached documentation: Columbus, J.; Sirguey, P. & Tenzer, R. (2011), 'A free, fully assessed 15-m DEM for New Zealand', Survey Quarterly 66, 16-19.

NZSoSDEM v1.0 is a Digital Elevation Model (DEM) covering the whole of New Zealand at a spatial resolution of 15m, created by the School of Surveying by interpolating LINZ topographic vector data.

The DEM was created as a series of 30 maps which extent correspond exactly with the LINZ Topo250 topographic map series. Smaller regions can thus be obtained individually but also fit together seamlessly to create a full countrywide DEM.

The accuracy of this product was comprehensively assessed using a statistically sound selection of 3791 check points throughout the country. The comparison of results with other available country-wide DEM demonstrate an improvement of NZDEM_SoS_v1.0 in terms of quality that comes in addition with a finer spatial resolution.

A full description of the interpolation/assessment process can be found in the attached documentation: Columbus, J.; Sirguey, P. & Tenzer, R. (2011), 'A free, fully assessed 15-m DEM for New Zealand', Survey Quarterly 66, 16-19.

NZDEM_SoS_v1.0 is a Digital Elevation Model (DEM) covering the whole of New Zealand at a spatial resolution of 15m, created by the School of Surveying by interpolating LINZ topographic vector data.

The DEM was created as a series of 30 maps which extent correspond exactly with the LINZ Topo250 topographic map series. Smaller regions can thus be obtained individually but also fit together seamlessly to create a full countrywide DEM.

The accuracy of this product was comprehensively assessed using a statistically sound selection of 3791 check points throughout the country. The comparison of results with other available country-wide DEM demonstrate an improvement of NZDEM_SoS_v1.0 in terms of quality that comes in addition with a finer spatial resolution.

A full description of the interpolation/assessment process can be found in the attached documentation: Columbus, J.; Sirguey, P. & Tenzer, R. (2011), 'A free, fully assessed 15-m DEM for New Zealand', Survey Quarterly 66, 16-19.